AMECO AC-1T transmitter DIY REPLICA KIT for EUROPE,AUSTRALIA and ASIA

Description

YOU ARE BIDDING FOR ONE "DO IT YOURSELF"...DIY  TRANSMITTER KIT.
THIS ONE HAS A TRANSFORMER for 220 VAC - just like the outlets in EUROPE,ASIA and AUSTRALIA.
IT IS AN AMECO AC-1T  BASED TRANSMITTER  for 80 m or 40 m or 30 m or 20 m HAM RADIO BAND !!
AC-1T  model is giving you the ability  to work  on one of the 4 bands :
80m or 40m or 30m or 20m !!
We are selling the kit  ONLY with crystal and coil for 80 m.
When you are ready you can buy crystals and coils for the rest of the bands from our eBay store
OR you can use your own crystals and coils !!
THE KNOBS CAN BE BLACK COLOR or RED COLOR.
I WILL SEND YOU BLACK KNOBS IF YOU DO NOT SAY ANYTHING!!
THE KIT WE ARE  OFFERING :
1) CHASSIS......PAINTED THE SAME HAMMERED SILVER AS THE ORIGINAL AC-1........AMECO # C-102
2) THE 2 TUBES ...6P6S/6V6GT/ and 6C5S/6X5GT/ .....................AMECO # T-6V6-GT  AMECO# T-6X5-GT
3) TRANSFORMER  : input 220 V AC  -  output 6.3V AC and  2 x 290V AC.......
4) SLIDE SWITCH (ON-OFF)................................................................................AMECO# S-160
5) R.F.CHOKE ....2 PCS.......................................................................................AMECO# RFC-250
6) RESISTORS SET of 3 ......................................................................................AMECO# R-126 , R-127 ,R-128
7) CAPACITORS SET of 6.....................................................................................AMECO# C-135 , C-136 ,C-137
8) LINE CORD with PLUG......................................................................................AMECO# H-152
9) COIL FORM  5 pin with 5 PIN SOCKET (white)................................................AMECO F-1000 + AMECO S-172
10) KNOB x 2..........................................................................................................AMECO# K-180
11) 2-SCREW TERMINAL STRIP...........................................................................AMECO# H-162
12) 2-LUG TERMINAL STRIP.................................................................................AMECO# H -151
13) RUBBER FEET x 4............................................................................................AMECO# H-163
14) OCTAL TUBE SOCKET ...x 3.....(black)...........................................................AMECO# S-171
15) VARIABLE CONDENSER : .............................................1x AMECO# C-133  + 1x 365+365pF
16) RUBBER GROMMET.......................................................................................AMECO# H-153
17)  WORKING  TOWEL..............................................................................................................
18) ROSIN COLOPHONY..FLUX...FOR A EASY SOLDERING......................................................
19) CONSTRUCTION and OPERATION MANUAL................................................AMECO# I-191
20) SO-239  ANTENNA CONNECTOR in  parallel  on AMECO # H-162 ON THE REAR PANEL
21) MORSE KEY  CONNECTOR (LIGHT BROWN).................................ON THE REAR PANEL
22) FUSE HOLDER....................................................................................ON THE REAR PANEL
23) QUARTZ CRYSTAL TYPE Z-2 ( F=7.xxx MHz )..............................................................
24) TRADITIONAL WATER SLIDE DECALS...........SEE THE PICS..............................................
25) CRAZY GLUE...........................................................................................................................
26) COIL WIRE...MAGNETIC WIRE 22 AWG................................................................................
IT IS A FULL KIT. WHEN YOU ARE DONE YOU WILL NEED A MORSE KEY AND ANTENNA ONLY!
IT WAS  PAINTED- Hammered Silver ....MINE IS GREEN :)
THE COLOR  IS  VERY CLOSE TO THE ORIGINAL....HAMMERED SILVER.
YOU HAVE TO INSTALL THE DECALS.
TAKE A LOOK WHAT WE RECEIVED :
Just a brief note of Thanks for a quality item. This went to my friend Marty WB2FOU who can't stop exclaiming about the quality of the kit you sold. He asked that I express his thanks to you. He told me he hasn't seen anything of this quality since his days building Heathkits.
73.
Joe AB1YO
......................
Just came across this cool kit. Very well made, I congratulate you on this kit.
I am building a 6DQ6 transmitter 3 band 15/40/80 mtrs right now.
I love this stuff. 73, Mike AB6CW.
.......................
OK thank you for your quick attention on this, I received the parts yesterday.
Thanks again George N8HBY
.......................
I'm slowly working my way through the kit, and so far I really have enjoyed it! I do GREATLY appreciate your continued help and guidance, it has been such a help with this kit.
KD8TAE
.......................
Awesome construction technique!
I agree every ham should start with basic equipment.
I teach Boy Scouts (I call them hamsters! hihi) and we start with
Morse code.
Best,
George KF5WFA
...What a fun hobby you've created for yourself! These little transmitters are such fun and was my first one as a 14 year old. If I didn't already have an AC-1 I'd purchase your kit. I'm just giving you thumbs up for the magic you create by having these available.
Thanks!
George
....."Nice and easy to build tube transmitter
All parts of the kit are in very good quality. I had a lot of fun to put it together. Transmitter worked immediately after assembly with output power of 5 to 6 Watts. There is also a very good step-by-step guidance included and Europeans can order this kit with 230 VAC-transformer.
Also appreciated the fast and very good contact with Kosta, AA9IV. Kit arrived in Germany after 7 working days.
Keep up the good work!
73 de Juergen, DL4NE"...........................................
You are Mr. SERVICE .There are  few people in this world as good as you.
TNX AGN and 73 AB0DV
Track Page Views With
Auctiva's FREE Counter