CertainTeed Intake Filtered Edge Ridge Vent

Description

The CertainTeed Intake Filtered Edge Ridge Vent provides continuous intake airflow at the roof�s edge and proper intake ventilation for homes with little or no overhang. This edge intake vent is rooftop installed, shingle over, and can be used with existing soffit or under eave vents. It is designed with internal baffles and a drainage system, along with an internal weather filter which provides three levels of weather protection. The CertainTeed Roof Edge Vent provides 9 square inches of net free area per linear foot.
Features
Co-polymer construction
Easily installs on the roof�s edge
Rooftop installation eliminates overhead with soffits and under eaves
Tabs on the underside of the vent assist with positioning the vent over the slot
Has a minimum of 3/12 roof pitch with no maximum
3/4in. Low profile helps it blend in with the roof
Specifications
Width: 11.4in.
Length of Each Piece: 4ft
Net Free Area: 9 sq. in. per linear ft.
Minimum Roof Pitch: 3/12
Constructed with a minimum of (10) pre-formed nail bosses
Openings are sized no wider than 1/4in.