CISCO 05-1244-02 CARD MODULE 32 Channels 100 GHz Wavelength Selective Switch

Description

mctechnologiesinc upgraded
G
EN-
T
EL
CISCO 05-1244-02 CARD MODULE 32 Channels 100 GHz Wavelength Selective Switch
Manufacturer
-CISCO
Item
- CISCO 05-1244-02 CARD MODULE 32 Channels 100 GHz Wavelength Selective Switch
Part Number
- 05-1244-02
Features/Data
-The 32WSS or 32WSS-L cards has six types of ports:
ADD RX ports (1 to 32): These ports are used for adding channels (listed in Table 1 or Table 2). Each add channel is associated with an individual switch element that selects whether that channel is added. Each add port has optical power regulation provided by a variable optical attenuator (VOA). The 32WSS has four physical receive connectors that accept multifiber push-on (MPO) cables on its front panel for the client input interfaces. Each MPO cable breaks out into eight separate cables.
EXP RX port: The EXP RX port receives an optical signal from another 32WSS card in the same network element (NE).
EXP TX port: The EXP TX port sends an optical signal to the other 32WSS card within the NE.
COM TX port: The COM TX (line input) port sends an aggregate optical signal to a booster amplifier card (for example, OPT-BST) for transmission outside of the NE.
COM RX port: The COM RX port receives the optical signal from a preamplifier (such as the OPT-PRE) and sends it to the optical splitter.
DROP TX port: The DROP TX port sends the split-off optical signal containing drop channels to the 32DMX card, where the channels are further processed and dropped.
Aggregate optical signals that enter the EXP RX and COM RX port are processed in two ways:
EXP RX Port Add Channel/Pass-through Processing
The incoming optical signal is received at the EXP RX port from the other 32WSS card within the NE. The incoming aggregate optical signal is demultiplexed into 32 individual wavelengths, or channels. Each channel is then individually processed by the optical switch, which performs add/pass-through processing. By using software controls, the switch either selects the optical channel coming in from the demultiplexer (that is, the pass-through channel) or it selects the external ADD channel. If the ADD port channel is selected this channel is transmitted and the optical signal coming from the demultiplexer is blocked.
After the optical switch stage, all of the channels are multiplexed into an aggregate optical signal, which is sent out on the COM TX port. The output is typically connected to an OPT-AMP-L or OPT-BST-E card (in the event a booster amplifier is needed) or to an OSC-CSM card (if no amplification is needed).
COM RX Port Optical Splitter Processing
The COM RX port receives the incoming optical signal and directs it to the 32WSS card’s optical splitter. The splitter optically diverts channels that are designated to be dropped to the DROP TX port. The DROP TX port is typically connected to the COM RX port of the 32DMX where the drop channels are being dropped. Channels that are not dropped pass-through the optical splitter and flow out of the 32WSS card EXP TX port. Typically, this optical signal is connected to the other 32WSS module within the NE.
Model Number
-AXIS-FW-4103
Includes
-
One (1) Cisco AXIS-FW-4103 ATM Uni Service Module for Cisco AXIS System 800-04809-01 F0
-No other accessories, batteries, power supplies, cables, hardware, software, etc. is included besides what is listed above.
Physical Condition
-Used - In good condition - See Pictures
Functional Condition
-Used - Pulled from a working environment
Warehouse Location
-WG4D #S360
Shipping Policy
Gen-Tel ships to all regions of the world.
All packages are shipped the same day, or next, from when payment is received.
We can ship on your UPS or FedEx account!  Send us a message prior to payment!
If you need a freight quote, please send us: address, whether item is going to a business or a residence, and if there is a dock or forklift available at that location.
Shipping Features
Each item is packed using bubble wrap or craft paper. All items are packed safely and securely!
Local pick-up is available. Please message us, and we will set up a time.
Customer Service
Returns are accepted within 30 days of the delivery date, and in the same condition as received. (unless otherwise noted in listing)
The staff at Gen-Tel strives to be perfect, but in the event that an item arrives in an unexpected condition, or if it was not as described, please contact us first before filing a case with eBay. We are here to help, and will do our best to make sure each customer is fully satisfied.
You're welcome to reach us through eBay messaging anytime!  We will respond very quickly!
Hours of Operation
Monday - Friday
8:00AM - 5:00PM (Eastern Standard Time)
Feel free to contact us at anytime!
NL
9 12 18