Vacuum Clamping Table CNC Chuck HG2824M Engraving or Machining, USA Made!

Description

ClampuSystems
Vacuum table HG2824M, CNC, Milling (11.02" x 9.45" Vacuum Area)
Hole Grid - Vacuum Table
Maximum precision with High Strength Aluminum
Check out our videos at: www.ClampuSystems.com/videos.html
Made in the USA! The "HG" series vacuum tables are made from solid cast aluminum, machined on both sides, have a high vibration dampening ability, and resistance to warping.  These tables are ideal for most metals and plastics and the
surface has a vacuum hole spacing of 10mm (0.39 inches).
High flow coolant systems can be used with these tables, however we would recommend using a liquid separator with your system to protect your vacuum pump.  We have liquid separators available for purchase on our website.
To use vacuum fittings, push the cut hose into the fitting and it will lock/seal itself.  To remove the hose, press the blue or black fitting ring while pulling the hose out.
Vacuum Table Includes:
HG2824M Vacuum Table
(1) 2824 Sized Rubber Mat
(1) 2824 Sized Fleece Vacuum Mat
(4) Push to Connect fittings
Manifold
Vacuum Gauge
Vacuum Hose
Table Material: Cast Aluminum Tooling Plate
Vacuum Ports: Two
0.25 inch Mounting Lip Surrounds Base
Perimeter
Overall Dimensions: 11.52" x 9.95" (293 x 253 mm)
Vacuum Area: 11.02" x 9.45" (280 x 240 mm)
Height: 1.125"
Additional vacuum mats are available for purchase. These vacuum mats ensure that when the work pieces are machined, there is no damage to the vacuum table surface. In addition, the vacuum mat friction coefficient increases significantly and seals the work piece with the vacuum table by means of the vacuum mat. The vacuum mat thickness allows for a small machining distance between the work piece and vacuum table surface.
This type of a vacuum table is designed to work with a vacuum pump, venturi, or blower, not a shop vac.
We recommend a min. of 26” Hg and 10 CFM for this vacuum table to work efficiently.
This type of vacuum table is not suitable for clamping wood products.  Check out our "SG" series vacuum tables for the ability to clamp wood materials.
We produce vacuum tables of different sizes and styles, and are continuously engaged in further development and new technological solutions.  Not all our vacuum systems are suitable for marketing on Ebay.  If you do not see what you need on Ebay then ask us!  We may have something for you in stock or we can customize a vacuum table just for you!
We not only welcome your Ebay feedback but also email feedback as well. We will continually be coming out with new and different types of vacuum table systems. Feel free to email comments and suggestion for future vacuum table ideas you would like to see and we will do our best to accommodate the popular requests in future models.